5 axis CNC Breakout board interface adapter board V5 type
Description:
- It can most connection 5pcs driver and control 5pcs motor in the same time
- It is with 4-wire limit switch to insure our safty movement
- It is with relay port to contro the cnc spindle
- Working voltage is 5VDC and support with MACH3,EMC2,KCAM4 software
- Size:9x5.7cm
25-pin parallel port control is defined as follows:
DB25 control pin (PIN) | The pin of the drive board | Comment
|
1 | STEPB | B(Fifth axis)pulse signal |
2 | STEPX | X(First axis) pulse signal |
3 | DIRX | X(First axis) direction of the signal |
4 | STEPY | Y(Secondaxis)pulse signal |
5 | DIRY | Y(Second axis)direction of the signal |
6 | STEPZ | Z(Third axis) pulse signal |
7 | DIRZ | Z(Third axis) direction of the signal |
8 | STEPA | A(Fourth axis) pulse signal |
9 | DIRA | A(Fourth axis) direction of the signal |
10 | LIMIT-1 | Limit input interface 1 |
11 | LIMIT-2 | Limit input interface 2 |
12 | LIMIT-3 | Limit input interface 3 |
13 | LIMIT-4 | Limit input interface 4 |
14 | DIRB | B(Fifth axis) direction of the signal |
15 | Vacant |
|
16 | RLY | Relay control |
17 | EN | All axis enable |
18-25 | GND | GND |
Remark:this 5 axis breakout board can connction with many driver type as a CNC 3/4/5 axis driver controller kit,pls if you intresting pls contact us!
Package include:
- 1 x 5 Axis Interface Breakout Board V5 type
- 1x Parallel Cable
- 1 X USB Cable
- English user manual will send by mail
5 axis CNC Breakout board interface adapter board V8 type
Description:
1) It can connect with 5 stepper motor driver to control 5pcs stepper motor,and board with high speed optocoupler be safe work for controller
2) It is with 4 wire optocoupler limit port and can connect with normal mechanical switch,PNP 3 wires proximity switch and 2 wires proximity switch
3) with relay port can control the spindle turn on/off
4) the input voltage is 12-36VDC
5) it support mach3 and Ncstudio card connect
6)it can output 12VDC power supply
7)Size:14x17cm
25-pin parallel port control is defined as follows:
PIN1 | PIN2 | PIN3 | PIN4 | PIN5 | PIN6 | PIN7 | PIN8 | PIN9 | PIN10 |
All axis EN | X axis DIR | X axis PU | Y axis DIR | Y axis PU | Z axis DIR | Z axis PU | A axis DIR | A axis PU | Limit 1 |
PIN11 | PIN12 | PIN13 | PIN16 | PIN17 | PIN14 | PIN18~25 |
|
| |
Limit 2 | Limit 3 | Limit 4 | B axis DIR | B axis PU | Relay port | GND |
|
|
|
Remark:this 5 axis breakout board can connction with many driver type as a CNC 3/4/5 axis driver controller kit,pls if you intresting pls contact us!
Package include:
- 1 x 5 Axis Interface Breakout Board V8 type
- 1x DB25 Parallel Cable
- English user manual will send by mail
4 axis CNC controller TB6560 stepper motor driver board Products Features:
CNC stepper motor driver board TB6560,the new chip TB6560AHQ of TOSHIBA, the max ouput peak current can reach to 3.5A , this driver board can drive the 2-phase or 4-phase stepper motor whose current is less than 3A.
The advantages of the TB6560AHQ chip:
- The vibration of the motor is small and low noise: because of the 2/8/16 resolution can satisfy the different speed.
- Flush type low heat: The area of the chip can support itself to cool when the current is low
- Supports a lot of stepper motors
- The advantages in the high-speed running condition
Features:
- it can drive three axis,The 4th axis expansion, to facilitate your needs 4-axis machining when working
- Spindle relay output, easy to use software such as mach3 to control spindle start and stop.
- Semi-flow control functions, and effective to stop the motor when the current is reduced to a minimum.
- Interface with a fan, you can add fan under your choice.
- With 3 wire 0.8-3.5A (peak) rated output of two-phase adjustable-current bipolar stepper motor drive;
- Standard parallel port interface, support for MACH2, KCAM4 series software;
- With optical isolation and DCDC power supply isolation, the full protection of your computer parallel port and equipment;
- with limit switch,can connection 4 aixs limit switch
- Support four microstepping ——1,1/2,1/8,1/16
- 12—36V single switching power supply,microchips to use as a 5V power supply, stable and heat small
- Using RC +7414 automatic semi-flow,the current automatic reduce when stepper motor stop to down the heat
Package include:
- 1 x 3 axis TB6560 Stepper Motor Driver board
- 1 x DB25 parallel cable (without it to save freight fee)
- 1 x Fan
- English user manual will send by email
Package include
- 1 x TB6560 Stepper Motor Driver board
- 1 x DB25 parallel cable
- 1 x Fan
- English user manual will send by email (pls give us your email address when you make payment)
3 axis CNC controller board TB6560 stepper motor driver board for CNC Router Mill:
The advantages of the TB6560AHQ chip:
- The vibration of the motor is small and low noise: because of the 2/8/16 resolution can satisfy the different speed.
- Flush type low heat: The area of the chip can support itself to cool when the current is low
- Supports a lot of stepper motors
- The advantages in the high-speed running condition
Features:
1, With 3 wire 0.8-3.5A (peak) rated output of two-phase adjustable-current bipolar stepper motor drive
2, Support four microstepping ——1,1/2,1/8,1/16
3, With optical isolation and DCDC power supply isolation, the full protection of your computer parallel port and equipment;
4, Using RC +7414 automatic semi-flow,the current automatic reduce when stepper motor stop to down the heat
5, Spindle relay output, easy to use software such as mach3 to control spindle start and stop.
6, 5 wire input control,it can set up limit,emergency,centred,tool setting etc
7, With manual port,and connect with manual control equipment
8, 12—36V single switching power supply,microchips to use as a 5V power supply, stable and heat small
9, Interface with a fan, you can add fan under your choice
ЦЕНА: 510грн.
Цена зависит от объёма заказа, возможны хорошие скидки, цену и наличие товара уточняйте!
Спасибо!